Product Overview

As devices become highly integrated, complete characterization requires a complete RF and microwave measurement solution. The E5080B brings R&D performance up to 53 GHz1 and flexibility to a midrange platform. Best-in-class dynamic range, trace noise, and temperature stability guarantee reliability and repeatability. Test consistently across your entire workflow with the same UI and SCPI commands as high-end PNAs.
 
The E5080B enables complete device characterization for passive components, amplifiers, mixers, and frequency converters. You can perform more tests with one box with integrated features such as DC sources, bias tees, pulse generators, pulse modulators, and internal second source2 . Gain deeper insights with software applications including spectrum analysis, mixer measurements, and noise figure. Choose from a 2- or 4-port option with frequency coverage from 9 kHz up to 20 GHz or for higher frequencies, 100 kHz up to 53 GHz.
 
Key Features:

• 9 kHz to 4.5/6.5/9/14/20 GHz, 100 kHz to 26.5/32/44/53 GHz
• 2 and 4-Port Models
• The most flexible and integrated ENA network analyzer
• Choose from a wide range of measurement application to gain deeper insight into your RF test
• Second source available on 4-port models (Opt. 4×2)
• Features the same intuitive GUI as Keysight’s high-performance network analyzers
• E5071C code compatibility

 
Specifications:

• MAXIMUM FREQUENCY: 53 GHZ
• Minimum Frequency: 9 kHz / 100 kHz
• SA Start Frequency: 9 kHz / 100 kHz
• System Dynamic Range: > 140 dB
• Output Power: 10 dBm
• Number of Built-In Ports: 2 or 4 ports (2nd source (optional) on 4-ports)
• Harmonics: -25 dBc (Typical)
• Best Speed at 201 Point, 1 Sweep: 1.6 msec
• Instrument Type: Benchtop
• Applications:
  • S-Parameters
  • Signal Integrity
  • Balance Measurements
• Components:
  • Cables
  • Antennas
  • Mixers/Frequency Converters
  • Filters/Duplexers
  • Amplifiers
  • Connectors
  • Isolators
• System Features:
  • Internal Bias-tees (optional, up to 20 GHz)
  • Built-in DC Sources (optional)
  • GPIB Interface (optional)
  • Device Handler I/O
  • Device Test, Application I/O
  • Removal SSD
  • Interfaces: Ethernet, USB2.0/3.0, DisplayPort VGA
• DANL @1 GHz: -150 dBm/Hz (Typical)
• Phase Noise @1 GHz (1 MHz offset): -128 dBc/Hz (Typical)
• Phase Noise @1 GHz (10 kHz offset): -103 dBc/Hz (Typical)
• Benchtop: Yes
• Temperature Stability: 0.005 dB/ ⁰C (Typical)
• Weight: 14 kg (2-port), 15 kg (4-port)