Product Overview

Frequency

• Range
  • R&S®SMBV-B103
    • CW mode: 9 kHz to 3.2 GHz
    • I/Q mode: 1 MHz to 3.2 GHz
  • R&S®SMBV-B106
    • CW mode: 9 kHz to 3.2 GHz
    • I/Q mode: 1 MHz to 3.2 GHz
• Setting time
  • SCPI mode, ALC state ON, CW mode: <3 ms
  • SCPI mode, ALC state ON, I/Q mode: <5 ms
  • SCPI mode, ALC state Table: <2 ms
  • SCPI mode, ALC state S&H:<7 ms
  • List mode:<1 ms

 
Level

• Maximum output power: 1 MHz < f = 6 GHz and >+18 dBm (PEP)
• Absolute level error: 1 MHz < f = 3 GHz and <0.5 dB
• Additional level error with ALC OFF, S&H: This mode is used with I/Q modulation and pulse modulation. <0.25 dB.
• Output impedance VSWR in 50 O system: 200 kHz < f = 6 GHz and <1.8
• Setting time
  • SCPI mode, ALC state ON, CW mode: <2.5 ms
  • SCPI mode, ALC state ON, I/Q mode: <5 ms
  • SCPI mode, ALC state Table: <2 ms
  • SCPI mode, ALC state S&H:<7 ms
  • List mode:<1 ms
• Reverse power
  • 1 MHz < f = 1 GHz - 50 W
  • 1 GHz < f = 2 GHz - 25 W
  • 2 GHz < f = 6 GHz - 10 W

 
Spectral purity

• Harmonics: f > 1 MHz; CW, level = 8 dBm and <–30 dBc
• Nonharmonics: CW, level > –10 dBm, >10 kHz carrier offset, f = 1500 MHz and <–70 dBc (nominal <–85 dBc)
• SSB phase noise
  • 20 kHz carrier offset, 1 Hz measurement bandwidth, CW
  • f = 100 MHz and <–141 dBc (nominal –147 dBc)
  • f = 1 GHz and <–122 dBc (nominal –128 dBc)
  • f = 6 GHz and <–106 dBc (nominal –112 dBc)
• Wideband noise: attenuator mode AUTO for level > 5 dBm, >10 MHz carrier offset, 1 Hz measurement bandwidth, CW and <–142 dBc(nominal –152 dBc)

 
Supported modulation modes

• Amplitude modulation: standard
• Frequency/phase modulation: standard
• Maximum FM deviation: f>3 GHz and 16 MHz
• Maximum fM deviation: f>3 GHz and 160 rad
• Pulse modulation: optional, with R&S®SMBV-K22
• On/off ratio: >80 dB
• Rise/fall time: 10 % to 90 % of RF amplitude and <20 ns, typ. 4 ns
• Minimum pulse width: using the optional R&S®SMBV-K23 pulse generator – 10ns

 
I/Q modulation

• Supported systems(with additional options)
  • R&S®SMBV-B10 baseband generator required
  • GSM/EDGE/EDGE evolution, 3GPP FDD incl. HSPA/HSPA+,TD-SCDMA, CDMA2000®, 1×EV-DO, EUTRA/ LTE, WiMAX IEEE 802.16-2004, Cor1-2005, 802.16e-2005 and 802.16Rev2/D3 , WLAN IEEE 802.11a/b/g/n, Bluetooth®, GPS, HD Radio™3), XM Radio, DVB-H/DVB-T, multicarrier CW
• Realtime custom digital modulation
  • R&S®SMBV-B10 baseband generator required
  • ASK, FSK, BPSK, QPSK, QPSK 45° offset, OQPSK, p/4-QPSK, p/2-DBPSK, p/4-DQPSK, p/8-D8PSK, 8PSK, 8PSK EDGE, 16QAM, 32QAM, 64QAM, 256QAM, 1024QAM
• I/Q modulator bandwidth
  • internal: 60 MHz or 120 MHz, depending on baseband option
  • external: >500 MHz
• Maximum waveform length: 32 Msamples
  • with R&S®SMBV-B55 option: 256 Msamples
• DAC resolution (ACLR)
  • WCDMA 3GPP FDD, TM 1/64 and typ. 67 dBc
• DAC resolution (EVM)
  • WCDMA 3GPP FDD, TM 1/64 and typ. 0.6 %
  • WiMAX IEEE 802.16e and typ. 0.4 %
  • EUTRA/LTE and typ. 0.4 %

 
Connectivity

• Remote control
  • IEC/IEEE
  • Ethernet (LAN)
  • USB
• Peripherals: USB 2.0